ORA-00600: Internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s]
This is an exceptional condition which might indicate a bug.
The parameters that come with this error give more information about the location where this exception occured.
You should contact Oracle support or browse metalink for more information regarding your specific error condition.
Also check the alert.log file and other trace files in the background_dump_dest or user_dump_dest for additional information.
Should you want to find a solution yourself and have access to Oracle Metalink, Oracle support provides the ORA-600 Lookup Tool with which you can troubleshoot the ORA-600.
This will help us tremendously in building a quality software product.
Welcome to our forum for Oracle error: ORA-00600 Add your own message
Internal Error occurred in u_gg_ds_mr_ma_rpt_raw.uf_retrieve. Dynamic SQL error: ORA-00600: internal error code, arguments: [msqopnws_sys], [0], [], [], [], [], [], [] select hist.yr, '_' || mhl_table.itm_cd || ' _' || hist.store_cd mhl_ohl_cd, sum(hist.tot_ret) sum_tot_ret, sum(hist.tot_cst) sum_tot_cst, sum(hist.tot_qty) sum_tot_
Query is as follows:
SELECT hist.yr, '_' || mhl_table.itm_cd || ' _' || hist.store_cd mhl_ohl_cd,
SUM (hist.tot_ret) sum_tot_ret, SUM (hist.tot_cst) sum_tot_cst,
SUM (hist.tot_qty) sum_tot_qty
FROM sh_sku_store hist, gm_sku, gm_itm mhl_table
WHERE mhl_table.itm_cd IN ('5505-3165')
AND gm_sku.itm_cd = mhl_table.itm_cd
AND hist.subclass_cd = mhl_table.subclass_cd
AND hist.sku_num = gm_sku.sku_num
AND hist.store_cd IN ('30')
AND hist.yr IN (2008, 2009)
AND hist.wk_num BETWEEN 6 AND 6
GROUP BY hist.yr, '_' || mhl_table.itm_cd || ' _' || hist.store_cd;
If I remove the where condition "AND hist.store_cd IN ('30')", then it works fine.
What could be the problem?
Thanks in advance
Regards
Nagaraj
It all depends on your Oracle version. What version are you using?
Most of the problems come with using partitioning.
Is the store_cd a number field? If so, try store_cd IN (30)
And what is the result if you just put store_cd = '30'?
In TOAD, when i dropped an index and tried to create a bit map index with the same name, i have got the error ORA-00600 internal erro code, arguments: [kxfqupp_bad_cvl], [4233], [6],[],[],[],[],[]
The query which I used is,
CREATE BITMAP INDEX
ON table name(column name)
NOLOGGING
TABLESPACE
PARALLEL 10 COMPUTE STATISTICS;
Can you please suggest me a solution to rectify this error.
I am getting the following error while executing a function.
v_Return = Oracle Error: Please Contact Support : ORA-00600: internal error code, arguments: [qctcte1], [0], [], [], [], [], [], []
The function goes like this.
CREATE OR REPLACE
FUNCTION get_org_full_path(p_org_id IN NUMBER) RETURN VARCHAR2 IS l_sqlerrm VARCHAR2(300);
l_err_message error_log.err_message%TYPE;
return_string VARCHAR2(4000) := '';
CURSOR c1 IS
SELECT TRIM(LTRIM(max(SYS_CONNECT_BY_PATH(orgname,': ')), ':')) orgfullpath
from
(
select org.orgname, org.ORGId ,
ROW_NUMBER() OVER (PARTITION BY part ORDER BY ORG.ORGID) AS curr,
ROW_NUMBER() OVER (PARTITION BY part ORDER BY ORG.ORGID) -1 AS prev from
(
select orgid, PARENTORGANIZATION, orgname,
ROW_NUMBER() OVER (PARTITION BY ORGID ORDER BY ORGID) part
from orgunit where orgname in (
SELECT CONNECT_BY_ROOT ORG.orgname orgname
FROM ORGUNIT ORG
WHERE orgid = p_org_id
CONNECT BY PRIOR orgid = PARENTORGANIZATION
)
)org
)org1
CONNECT BY prev = prior curr
START WITH prev = 0;
BEGIN
FOR i IN c1
LOOP
return_string := i.orgfullpath;
END LOOP;
RETURN TRIM(return_string);
EXCEPTION
WHEN others THEN
l_sqlerrm := sqlerrm;
log_error_prc('get_org_full_path', l_sqlerrm, l_err_message);
RETURN l_err_message;
END;
Can you please help me in resolving this issue.
-- Vikas Kumar
I tried to compile this statement, but have an error,
PROCEDURE Send_Word_Email(file_spec in varchar2,
po_no in number) IS
email_addr inv_supplier.email%TYPE;
supp_code inv_supplier.code%TYPE;
cursor supp_cur(pPO in inv_pohead.po%TYPE) is
select code,email from inv_supplier
where code in (select supplier from inv_pohead where po=pPO);
cursor cpro_cur is
select name from inv_cprofile
where rownum = 1;
subject varchar2(80):='Purchase Order';
error_string varchar2(80):='';
BEGIN
-- checking if the word file has been generated by reports
-- if the file does not exist, it might be difficult to catch
-- the error
if File_Exist(file_spec) then
-- get email address from supplier table
for supp_rec in supp_cur(po_no) loop
email_addr := supp_rec.email;
supp_code := supp_rec.code;
end loop;
if email_addr is null or Length(email_addr) = 0 then
-- write to log file about email_addr not filled in
if Length(:msg_block.message) > 0 then
:msg_block.message := :msg_block.message||chr(13);
end if;
:msg_block.message := :msg_block.message||'PO#'||to_char(po_no)||': E-mail address for supplier '||supp_code||' is empty!';
else
-- get company name from main profile table
for cpro_rec in cpro_cur loop
subject := subject||' from '||cpro_rec.name;
end loop;
-- dialog=0 means no user interaction
-- attachment_file_spec=null means no attachment file
begin
error_string := mailx.send(email_addr,
subject,
'Enclosed please find purchase order in Word document being attached!',
0,
file_spec);
if Length(error_string) > 0 then
if Length(:msg_block.message) > 0 then
:msg_block.message := :msg_block.message||chr(13);
end if;
:msg_block.message := :msg_block.message||'PO#'||to_char(po_no)||': '||error_string;
end if;
exception
when others then
if Length(:msg_block.message) > 0 then
:msg_block.message := :msg_block.message||chr(13);
end if;
:msg_block.message := :msg_block.message||'PO#'||to_char(po_no)||': Encounter error sending to '||email_addr||'!';
end;
end if;
else
-- have to write to a log file regarding report file not
-- generated
if Length(:msg_block.message) > 0 then
:msg_block.message := :msg_block.message||chr(13);
end if;
:msg_block.message := :msg_block.message||'PO#'||to_char(po_no)||': Report file is not generated!';
end if;
END;
Error
------
Compiling procedure SEND_WORD_EMAIL...
Compilation error on procedure SEND_WORD_EMAIL:
PL/SQL ERROR 0 at line 0, column 0
ORA-00600: internal error code, arguments: [17069], [68476056], [], [], [], [], [], []
Compilation errors have occurred.
Can someone help me to fix this?
let me know the reason of this please.
Thank you in advance..
Regards
Prasant
----------------------------------------------------------------------------
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1619.trc:
ORA-00600: internal error code, arguments: [729], [800], [space leak], [], [], [], [], []
Sat Apr 5 17:24:38 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1619.trc:
ORA-00600: internal error code, arguments: [1234], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [729], [800], [space leak], [], [], [], [], []
Sat Apr 5 17:34:24 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1527.trc:
ORA-00600: internal error code, arguments: [729], [180800], [space leak], [], [], [], [], []
Sat Apr 5 17:34:27 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1527.trc:
ORA-00600: internal error code, arguments: [1234], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [729], [180800], [space leak], [], [], [], [], []
Sat Apr 5 17:39:50 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1831.trc:
ORA-00600: internal error code, arguments: [729], [800], [space leak], [], [], [], [], []
Sat Apr 5 17:39:54 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1831.trc:
ORA-00600: internal error code, arguments: [1234], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [729], [800], [space leak], [], [], [], [], []
Sat Apr 5 17:44:55 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_25871.trc:
ORA-00600: internal error code, arguments: [729], [198400], [space leak], [], [], [], [], []
Sat Apr 5 17:44:59 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_25871.trc:
ORA-00600: internal error code, arguments: [1234], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [729], [198400], [space leak], [], [], [], [], []
Sat Apr 5 20:34:53 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1603.trc:
ORA-00600: internal error code, arguments: [729], [17600], [space leak], [], [], [], [], []
Sat Apr 5 20:34:57 2008
Errors in file /oracle/admin/smswwil1/udump/smswwil1_ora_1603.trc:
ORA-00600: internal error code, arguments: [1234], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [729], [17600], [space leak], [], [], [], [], []
You will have to work with Oracle support in order to resolve this.
If you are not on the latest release, upgrading might resolve your problem
I have a problem in compiling the following lines in Oracle 10g a sequence numeber gernrating
"select seq_owner.nextval into :owners_block.owner_id from dual;"
could anyone masters pls help me out...to solve the problems
bye
Parallel bitmap index creation may cause ORA-00600 or the index may give you wrong results.
As a workaround the index can be build without parallel.
WHEN I TRY TO COMPILE THE FORM BASED PACKAGE THE ABOVE INTERNAL ERROR IS COMMING.
ALL THE PROCEDURES THAT HV BEEN INCLUDED IN THE PACKAGE ARE RUNNING SUCCESSFULLY AS THESE ARE
DATABASE PROCEDURES.
PLZ HELP..!!
REGARDS
plese provied me the solution for that problem i am also getting the same problem
ORA-00600: internal error code, arguments: [qcsrwugr2], [437], [], [], [], [], [], []
I am using Toad 9.6 and Oracle 10g
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [ksmlsge1], [], [], [], [], [], [], []
ORA-27103: internal error
OSD-00013: Message 13 not found; product=RDBMS; facility=SOSD
Current SQL information unavailable - no SGA.
plsql_code_type is INTERPRETED
Can you confirm that you are running this version?
It had to do with a difference in users running the oracle software, and the user which compiled the NCOMP'ed the procedure/function/package
I am getting this error in the allert log as
Wed Apr 08 19:33:41 2009
Errors in file f:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_2724.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
and it dumps the memory into the trace file
f:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_2724.trc
which is generated every 15 minutes and grow upto 60MB.
I donot know for what reason this error comes, but for this I ran out of my disk space very rapidly.
please help
thanks
select nvl(instance_name,'NULL') from v$instance;
I am getting the proper instance name.
SQL> select nvl(instance_name,'NULL') from v$instance;
NVL(INSTANCE_NAM
----------------
orcl
thanks
I ama giving some part of the trace file generated.
--
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Current SQL statement for this session:
BEGIN :success := dbms_ha_alerts_prvt.check_ha_resources; END;
----- PL/SQL Call Stack -----
object line object
handle number name
2546B1D8 418 package body SYS.DBMS_HA_ALERTS_PRVT
2546B1D8 552 package body SYS.DBMS_HA_ALERTS_PRVT
2546B1D8 305 package body SYS.DBMS_HA_ALERTS_PRVT
1DDDF218 1 anonymous block
thanks
When I run the below query on TOAD, it gives me the error:
Query: SELECT c1.emplid, c1.empl_rcd, c1.effdt FROM PS_JOB c1
WHERE POSITION_NBR = ( select A.MANAGER_POSN from ps_dept_tbl A, ps_job b
where b.emplid= '0070' and b.empl_rcd = '0' and b.hr_status = 'A'
and a.deptid = b.deptid and a.setid = b.setid_dept
and a.effdt = (select max(b1.effdt)from ps_dept_tbl b1 where a.deptid = b1.deptid and a.setid = b1.setid AND B1.EFFDT < SYSDATE )
and b.effdt = (select max(b1.effdt)from ps_job b1 where b.emplid = b1.emplid AND B1.EFFDT < SYSDATE )
and b.effseq = (select max(b1.effseq) from ps_job b1 where b1.emplid = b.emplid and b1.effdt = b.effdt) )
and c1.effdt = (select max(b1.effdt)from ps_job b1 where b1.position_nbr = c1.position_nbr AND B1.EFFDT < SYSDATE)
Error: ORA-00600: internal error code, arguments: [kkqtcpcky:ficand], [], [], [], [], [], [], []
Comparitevely, when I remove the last effdt cond (c1.effdt cond), the the query runs fine. Can you plz suggest the solution to this problem.
TIA
DK
SQL> execute dbms_propagation_adm.drop_propagation( propagation_name => 'EH_PROPAGATION', drop_unus
ed_rule_sets => TRUE);
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kwqbgqc: bad state], [1], [1], [],
[], [], [], []
ORA-06512: at "SYS.DBMS_PROPAGATION_INTERNAL", line 611
ORA-06512: at "SYS.DBMS_PROPAGATION_INTERNAL", line 454
ORA-06512: at "SYS.DBMS_PROPAGATION_ADM", line 105
ORA-06512: at line 1
Need solution to help me clean up streams. Even STRMADMIN refuses to drop as below:
SQL> drop user strmadmin cascade;
drop user strmadmin cascade
*
ERROR at line 1:
ORA-01940: cannot drop a user that is currently connected
I have developed my form in Forms 6i with Database 9i but as I try to compile my form in froms 6i with Database 10g It gives me an error ORA-00600.
So request u all to please send me the solution.
Thanks
You'll have to work with Oracle support to solve this issue.
The full table is updated and has no index. The table has 76 million rows.
ORA-00600 errors are Oracle crashed, and are mostly related to a bug. You probably need to have a patch in order to fix this issue.
when i runa report i ahve been getting the error message as ORA-00600: internal error code, arguments: [qcscpqbTxt], [600], [], [], [], [], [], []
and my oracle version is 10.2.0.2 and my o.s is windows server 2008
Enter your messagORA :00600 oracle internal error code with arguments [2037],[],,[]...., pls suggest a good solution.
Additional information: ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4194], [45], [56], [], [], [], [], []
could any body Help me to solve this problem
Check out metalink document 39283.1
https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=39283.1
you can try to restart your database to see if the problem is resolved, else you need to do a recovery.
Need help in solving the below oracle internal error code
ORA-00600: internal error code, arguments: [16500], [kqdcru], [D], [2], [57], [BIN$a3aDQ5tRNBzgQBCstQweoA==$0], [], []
I have a procedure where i need to create tables dynamically. When the execution comes to that line it gives the above error.
I want the cause and solution for the above error ASAP. Thanks in advance
Sri
Try to purge the recyclebin and redo the action you were doing.
To purge the recyclebin, use the following command:
For just the recyclebin of the connected user:
purge recyclebin;
For all the objects in the recyclebin (need SYSDBA privileges for that):
purge dba_recyclebin;
If i am not wrong and if i use Purge Recyclebin, i may lose data from recyclebin ie flash back data.
Can i know what 16500 means
This is probably a bug you are running into.
java.sql.SQLException(ORA-00600: internal error code, arguments: [ktrgcm_3], [], [], [], [], [], [], []
) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
"The problem happens when reclaiming space from a txn free list when migrating blob data from inline to out-of-line."
In this note, there is a workaround for your problem, but the best thing is to work with Oracle support.
I have IBM R61 Laptop.( 1GB RAM ) I installed Linux4 & Oracle 10g.in my lap top. After creatin databse in 10g, when I try to execute SQL Statements I am gettin ora-0600 error.
But when I followed same installation procedure in desktop, its workin fine.
So, my doubt is , does Oracle 10g works fine in all machines with same configaration..?
There should be no problem if both configurations are comaptible, and if the hardware and operating system is certified by Oracle.
You can have a look at the certification matrix in metalink to verify if the setup your are using is certified.
HI...
I am Usin Acer laptop (1GB RAM core-deo processor) .
I have installed RedHat Linux 4.
but every time beofore loging in I will get one error message.
its. PCI:Memory Allocation Failed @004......................................................... something like this.
wat is cause for this..? and how to overcome.?
WIthout the exact ORA-00600 trace file it is difficult to tell, but one possibility is a physical corruption of a memory stick
Hi Folks,
I have a couple of integrated SPs. One of those is returning me a SQL with some parameters. This SQL runs fine first time. If i execute it again, it gives me the ORA-0600 error.
More on that, If i wait for 10 mins for the next execution, it is working fine.
Oracle DB:- 10.0.2
Rest all the created objects are working fine. PLease help!!!!
Regards,
Tanuj Mittal(tanuj.mittal@wachovia.com)
ORA-00600: internal error code, arguments: [kcbgtcr_1], [1095002], [7], [466118599], [627], [], [], []
Please login to My Oracle support.
There are a number of bugs reported which generates this error.
Depending on your Oracle version, you will have to patch your version of Oracle.
Hi,
I am facing the below error when running an update query.
java.sql.SQLException: ORA-00600: internal error code, arguments: [kkslpbp:1], [], [], [], [], [], [], [] ORA-06512:
Please help me out.
Thanks,
Mallikarjun
Enter your message
Hi, i am facing the problem ORA-00600 in oracle 9i, it insert some data but some not with following error. plz help
sqlexception ORA-00600: internal error code, arguments: [4194], [26], [29], [], [], [], [], []
thanks
(Roshan)
HI
My questions are
what are major and minnor issues arriesing in pl.sql project.
what kind of user defing exceptions and cursors are mostly used in pl.sql projects
plz help me as soon as possible/
thank you.
please show me how to fix the error; ora 00600; internal error code.
An ORA-00600 means that there was an exception inside the Oracle software and that it probably require a patch in order to fix the error
so what we can do........
It seems like the file you've downloaded is corrupt.
Redownload the installer and try again
Hi
I am getting following error at the time of installing 10g on RHEL 4:
ORA-00600: internal error Code argument : [ keltnfy-Igmlnit ]. [ 46 ], [] []
can anybody help me out
delete from table where ref_date like '%xxx%' and rownum < 500000
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcbnew_3], [80], [], [], [], [],
[], []
Try to flush the buffer cache and reissue your statement.
alter system flush buffer_cache;
Enter your message
we ha
i am getting error ora-0600 error while taking the database from mount mode to open mode.
so i am unable to open database . can some body give solution for this .
Check the alert.log file for additional details on this error.
You need to include the arguments of the ORA-00600 error, without them we cannot diagnose this error
Hi,
While creating the error log on a table in oracle 11g I got below error.
and I got this error for only 'STTSTC' table,for remaining tables it is working.
could you please help me to resolve the below error.
Error starting at line 1 in command:
BEGIN
DBMS_ERRLOG.create_error_log (dml_table_name => 'STTSTC');
END;
Error report:
ORA-00600: internal error code, arguments: [KGHALO2], [0x0], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.DBMS_SQL", line 1053
ORA-06512: at "SYS.DBMS_ERRLOG", line 112
ORA-06512: at line 2
00600. 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"
*Cause: This is the generic internal error number for Oracle program
exceptions. This indicates that a process has encountered an
exceptional condition.
*Action: Report as a bug - the first argument is the internal error number
Thanks in advance,
Uday.
This is probably a bug in Oracle with the allocation of heap memory.
Are you on the latest patch version of Oracle?
Is your sga sized correctly? If not, you can try to increase the sga
Thanks DbMotive.
data type size might be changed wen using reference key
Oracle11GR1, 2 Node Cluster, Windows 2008R2 Server mit einem Data Guard.
Wer hat eine solche Fehlermeldung schon mal fixen müssen?
Leider habe ich nicht mehr Informationen.
Vielen Dank für Eure Hilfe
This is caused by an Oracle bug (9139693), where the size of recover_history.ir is larger than an internal limit.
The workaround is to remove or rename file $DIAG_DEST/rdbms/<DB>/<SID>/ir/recovery_history.ir
There is currently no fix, only for 12.1 which is not out yet
I am getting the below error while running the stored procedure in Oracle Database 11g Release 11.2.0.1.0
The Database is in Linux OS
Can anybody give a solution for this?
java.sql.SQLException: ORA-00600: internal error code, arguments: [kkmupsViewDestFro_4], [115833], [115591], [], [], [], [], [], [], [], [], []
I am getting the below error while running the stored procedure in Oracle Database 11g Release 11.2.0.1.0
The Database is in Linux OS
Can anybody give a solution for this?
java.sql.SQLException: ORA-00600: internal error code, arguments: [kkmupsViewDestFro_4], [115833], [115591], [], [], [], [], [], [], [], [], []
Add your message
If you need more information about this particular error message, you can leave a forum message.
We are replying to this message whenever we have some spare time, so please do not consider this as a private 'solve my critical issue asap' service.
Should you need professional Oracle Assistance to make your project a success, please have a look at our consultancy services.
In order to prevent automatic generation of messages, we are asking for a validation code. This code is unique and is generated every time a new message is asked.
If you do not enter the validation correctly, your message will not be recorded.